Nuclear Production of Hydrogen
Fourth Information Exchange Meeting, Oakbrook, Illinois, USA , 14-16 April 2009
Hydrogen has the potential to play an important role as a sustainable and environmentally acceptable energy carrier in the 21st century. This report describes the scientific and technical challenges associated with the production of hydrogen using heat and/or electricity from nuclear power plants, with special emphasis on recent developments in high-temperature electrolysis and the use of different chemical thermodynamic processes. Economics and market analysis as well as safety aspects of the nuclear production of hydrogen are also discussed.
- Click to access:
-
Click to download PDF - 18.54MBPDF
Integrated laboratory scale demonstration experiment of the hybrid sulphur cycle and preliminary scale-up
Nuclear Energy Agency
The hybrid sulphur cycle is today one of the most promising processes to produce hydrogen on a massive scale within the scope of high temperature nuclear reactors development. Thus, the Fuel Cycle Technology Department at CEA Marcoule is involved in studying the hybrid sulphur process from a technical and economical performance standpoint. Based on mass and energy balance calculations, a ProsimPlusTM flow sheet and a commercial plant design were prepared. This work includes a study on sizing of the main equipment. The capital cost has been estimated using the major characteristics of main equipment based upon formulae and charts published in literature. A specific approach has been developed for electrolysers. Operational costs are also proposed for a plant producing 1 000 mol/s H2.
- Click to access:
-
Click to download PDF - 1.71MBPDF