Mark | Date Date | Title Title | |||
---|---|---|---|---|---|
18 Jun 2009 |
Emission Assessment for Identification of Sources and Release of Airborne Manufactured Nanomaterials in the Workplace: Compilation of Existing Guidance
This document compiles existing guidance on emission assessment for identification of sources and release of airborne manufactured nanomaterials in the Workplace. The document provides guidance for health and safety professionals, specifically for... |
||||
19 Jun 2009 |
Comparison of Guidance on Selection of Skin Protective Equipment and Respirators for Use in the Workplace: Manufactured Nanomaterials
This document compares guidance on personal protective clothing, gloves and respirators, including compilation of efficacy of personal protective equipment, especially respirator cartridges and gloves used when handling nanomaterials in the... |
||||
22 Jun 2009 |
Identification, Compilation and Analysis of Guidance Information for Exposure Measurement and Exposure Mitigation: Manufactured Nanomaterials
This report compiles guidance information for exposure measurement and exposure mitigation for manufactured nanomaterials in occupational settings. It addresses their adequacy when handling manufactured nanomaterials. This document is a building... |
||||
10 Jul 2009 |
Preliminary Review of OECD Test Guidelines for Their Applicability to Manufactured Nanomaterials
Many of the OECD Test Guidelines are applicable, with conditions in some cases, while some are inadequate for testing Manufactured Nanomaterials (MN) as measuring, dosing, delivery and tracking nanomaterials are not reliably accomplished at this... |
||||
01 Dec 2010 |
Compilation and Comparison of Guidelines Related to Exposure to Nanomaterials in Laboratories
This document aims to provide an overview of recently published guidelines regarding the usage of nanomaterials on a laboratory scale. It is intended to perform a compilation of exposure mitigation guidelines relating to laboratories that handle... |
||||
18 Dec 2012 |
Guidance on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials
The purpose of this guidance was primarily to assist sponsors as they conduct testing in support of the WPMN exploratory program. It therefore focuses on the kinds of tests that address the endpoints and the types of nanomaterials being tested under... |
||||
21 Jan 2016 |
Physical-Chemical Parameters: Measurements and Methods Relevant for the Regulation of Nanomaterials
This report summarises the discussions of a workshop on the applicability of existing OECD Test Guidelines (TG) on physical-chemical properties of manufactured nanomaterials, and further identifies the need to update current or develop new OECD Test... |
||||
17 Feb 2016 |
Categorisation of Manufactured Nanomaterials
This report summarises the discussions of a workshop on the development of a categorisation approach for manufactured nanomaterials in order to improve the decision making process. The end goal was to agree on a set of recommendations on how to move... |
||||
30 May 2016 |
Multiwalled Carbon Nanotubes (MWCNT): Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
08 Jun 2016 |
Silicon Dioxide: Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
01 Jul 2016 |
Fullerenes (C60): Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
07 Jul 2016 |
Single Walled Carbon Nanotubes (SWCNTs): Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
04 Nov 2016 |
Strategy for Using Metal Impurities as Carbon Nanotube Tracers
This document describes practical and cost-effective monitoring approaches for using metal impurities in carbon nanotubes (CNTs) as indicators of their presence in the workplace. Its goal is to supplement the “toolbox” of existing methods available... |
||||
04 Nov 2016 |
Gold Nanoparticle Occupational Exposure Assessment in a Pilot Scale Facility
This document presents a case study on exposure assessment of nano-gold(AuNP), which has been conducted in a pilot-scale facility to perform an exposure assessment during the synthesis of AuNPs. The main objective of this project is to identify tasks... |
||||
28 Nov 2016 |
Titanium Dioxide: Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
16 Oct 2017 |
Silver Nanoparticles: Summary of the Dossier
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This... |
||||
30 Oct 2017 |
Strategies, Techniques and Sampling Protocols for Determining the Concentrations of Manufactured Nanomaterials in Air at the Workplace
The objective of this document is to contribute to existing knowledge regarding methods for measuring characteristics of airborne nanoparticles and controlling occupational exposure to airborne nanoparticles, and to gather data on nanoparticle... |
||||
23 Mar 2018 |
Evaluation of In Vitro Methods for Human Hazard Assessment Applied in the OECD Testing Programme for the Safety of Manufactured Nanomaterials
The Testing Programme for the Testing of Manufactured Nanomaterials tested 11 manufactured nanomaterials (MNMs) to generate information including their physico-chemical properties, environmental fate, and environmental and mammalian toxicity. The... |
||||
22 May 2018 |
Assessment of Biodurability of Nanomaterials and their Surface Ligands
Biodurability of nanomaterials (NMs) through dissolution and enzymatic biodegradation or chemical disintegration is an important property that needs to be investigated for their potential to cause harm to humans and the environment. NMs may therefore... |
||||
27 May 2019 |
Physical-Chemical Decision Framework to inform Decisions for Risk Assessment of Manufactured Nanomaterials
This framework helps to identify the appropriate methods for characterising physico-chemical endpoints for different manufactured nanomaterials, or types of nanomaterials, for use in risk assessment and management, starting with basic substance... |
OECD Series on the Safety of Manufactured Nanomaterials and other Advanced Materials
The OECD aims to help governments co-operate in assessing and managing the risks from the production and use of manufactured nanomaterials. It covers issues related to risk assessment, regulatory programmes and a safer innovation approach. The OECD has also started discussing the safety of advanced materials. This Series includes tools for the safety assessment of nanomaterials and other advanced materials, as well as information relevant for the implementation of safety policies in member countries.
English
- ISSN: 30076250 (online)
- https://doi.org/10.1787/e7a5fc17-en
1 - 20 of 32 results
Emission Assessment for Identification of Sources and Release of Airborne Manufactured Nanomaterials in the Workplace: Compilation of Existing Guidance
OECD
18 Jun 2009
This document compiles existing guidance on emission assessment for identification of sources and release of airborne manufactured nanomaterials in the Workplace. The document provides guidance for health and safety professionals, specifically for...
Comparison of Guidance on Selection of Skin Protective Equipment and Respirators for Use in the Workplace: Manufactured Nanomaterials
OECD
19 Jun 2009
This document compares guidance on personal protective clothing, gloves and respirators, including compilation of efficacy of personal protective equipment, especially respirator cartridges and gloves used when handling nanomaterials in the...
Identification, Compilation and Analysis of Guidance Information for Exposure Measurement and Exposure Mitigation: Manufactured Nanomaterials
OECD
22 Jun 2009
This report compiles guidance information for exposure measurement and exposure mitigation for manufactured nanomaterials in occupational settings. It addresses their adequacy when handling manufactured nanomaterials. This document is a building...
Preliminary Review of OECD Test Guidelines for Their Applicability to Manufactured Nanomaterials
OECD
10 Jul 2009
Many of the OECD Test Guidelines are applicable, with conditions in some cases, while some are inadequate for testing Manufactured Nanomaterials (MN) as measuring, dosing, delivery and tracking nanomaterials are not reliably accomplished at this...
Compilation and Comparison of Guidelines Related to Exposure to Nanomaterials in Laboratories
OECD
01 Dec 2010
This document aims to provide an overview of recently published guidelines regarding the usage of nanomaterials on a laboratory scale. It is intended to perform a compilation of exposure mitigation guidelines relating to laboratories that handle...
Guidance on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials
OECD
18 Dec 2012
The purpose of this guidance was primarily to assist sponsors as they conduct testing in support of the WPMN exploratory program. It therefore focuses on the kinds of tests that address the endpoints and the types of nanomaterials being tested under...
Physical-Chemical Parameters: Measurements and Methods Relevant for the Regulation of Nanomaterials
OECD
21 Jan 2016
This report summarises the discussions of a workshop on the applicability of existing OECD Test Guidelines (TG) on physical-chemical properties of manufactured nanomaterials, and further identifies the need to update current or develop new OECD Test...
Categorisation of Manufactured Nanomaterials
OECD
17 Feb 2016
This report summarises the discussions of a workshop on the development of a categorisation approach for manufactured nanomaterials in order to improve the decision making process. The end goal was to agree on a set of recommendations on how to move...
Multiwalled Carbon Nanotubes (MWCNT): Summary of the Dossier
OECD
30 May 2016
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Silicon Dioxide: Summary of the Dossier
OECD
08 Jun 2016
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Fullerenes (C60): Summary of the Dossier
OECD
01 Jul 2016
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Single Walled Carbon Nanotubes (SWCNTs): Summary of the Dossier
OECD
07 Jul 2016
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Strategy for Using Metal Impurities as Carbon Nanotube Tracers
OECD
04 Nov 2016
This document describes practical and cost-effective monitoring approaches for using metal impurities in carbon nanotubes (CNTs) as indicators of their presence in the workplace. Its goal is to supplement the “toolbox” of existing methods available...
This document presents a case study on exposure assessment of nano-gold(AuNP), which has been conducted in a pilot-scale facility to perform an exposure assessment during the synthesis of AuNPs. The main objective of this project is to identify tasks...
Titanium Dioxide: Summary of the Dossier
OECD
28 Nov 2016
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Silver Nanoparticles: Summary of the Dossier
OECD
16 Oct 2017
To ensure that the tests used to address the safety of Manufactured Nanomaterials are consistent and defensible; the OECD launched the Sponsorship Programme for the Testing of Manufactured Nanomaterials (Testing Programme) in November 2007. This...
Strategies, Techniques and Sampling Protocols for Determining the Concentrations of Manufactured Nanomaterials in Air at the Workplace
OECD
30 Oct 2017
The objective of this document is to contribute to existing knowledge regarding methods for measuring characteristics of airborne nanoparticles and controlling occupational exposure to airborne nanoparticles, and to gather data on nanoparticle...
Evaluation of In Vitro Methods for Human Hazard Assessment Applied in the OECD Testing Programme for the Safety of Manufactured Nanomaterials
OECD
23 Mar 2018
The Testing Programme for the Testing of Manufactured Nanomaterials tested 11 manufactured nanomaterials (MNMs) to generate information including their physico-chemical properties, environmental fate, and environmental and mammalian toxicity. The...
Biodurability of nanomaterials (NMs) through dissolution and enzymatic biodegradation or chemical disintegration is an important property that needs to be investigated for their potential to cause harm to humans and the environment. NMs may therefore...
Physical-Chemical Decision Framework to inform Decisions for Risk Assessment of Manufactured Nanomaterials
OECD
27 May 2019
This framework helps to identify the appropriate methods for characterising physico-chemical endpoints for different manufactured nanomaterials, or types of nanomaterials, for use in risk assessment and management, starting with basic substance...